This is a Universal Wiring Harness designed to work with any 568A or 568B Network Cabling Plan.

This EZCORD is 12 inches in length and designed to split a standard single Ethernet cable into 4 separate circuits so as to avoid running additional cables for expansion. Typically, the male plug of one EZ80003232 Cheater Cord is inserted into an outlet on the "House” Patch Panel (near the data switch or router). Then, the 4 jacks of the cord are fed by 4 different signals such as 2 digital PBX extension circuits that use Pins 3 & 6 (like Panasonic PBX systems) and 2 Generic Single Line Telephones or Single Central Office Trunks. Another EZ80003232 Cheater Cord is then plugged into the wall outlet at the destination location where it’s broken down into 4 separate jacks and 4 separate circuits again.

Jack #1:
- Pins 4 & 5 = ANALOG (Generic Single Line Telephone or Single Central Office Trunk)

Jack #2:
- Pins 3 & 6 = DIGITAL (Panasonic Compatible Digital Telephones)

Jack #3:
- Pins 4 & 5 = ANALOG (Generic Single Line Telephone or Single Central Office Trunk)

Jack #4:
- Pins 3 & 6 = DIGITAL (Panasonic Compatible Digital Telephones)

The final result is a universal wiring scheme that can be plugged directly into any 568a or 568b patch panel.

Each EZ80003232 Cheater Cord has an 8-pin RJ45 plug and two (2) 8-pin RJ45 jacks that are color-coded in ORANGE with the single term "DIGITAL” and two (2) 8-pin RJ45 jacks that are color-coded in BLUE with the single word "ANALOG”for EZ identification.